CAPTURE THE PICTURE:
NOVA PHOTO DIGITIZER———–
Don’t waist time placing the pattern on a special digitizing surface by fixing them with adhesive tape or some other time-wasting methods.
Just clean-up a bit your normal working table, arrange the patterns there and go to computer. ONE simple click, and the camera automatically captures the picture and transfers it to the computer. The image is automatically processed and the patterns are extracted in just a few seconds.
A smart and simple calibration procedure is necessary to be done only one time when you first install the system, offering comfortable precision of less than 0.7mm.
CONTROL & EDIT:
Inspect quick and easy the result of the automatic digitizer using the contour play function. Measure Distances and perimeter contour. Check and adjust the internal element or the shape of the curves.
SAVE THE PATTERNS:
Save the patterns directly save the patterns directly in the native format of your cad system.
No matter what cad system you use, the photo digitizer is compatible with it (see the list on the back).
The system will remember the save settings (location, format, etc).
So you can have the patterns available directly to your cad system with one simple click.
WHAT CAD SYSTEMS ARE COMPATIBLE WITH PHOTO DIGITIZED:
The photo digitizer can save the patterns in the native original format of , NOVA CAD, lectra, Gerber, Assyst, Gemni. The pattern can also be exported for any other application using the standard dxf amma format, and it was tested with FK, tetra cad, Optitex, wearcadd, konsan, tukacad, PloyPattern Ricehpeasec, Astor, AGMS, Julivi, Modasoft.
HOW CAN YOU INSTSLL THE PHOTO-DIGITIZER:
The photo digitizer system can be setup in various configuration, depending on the arrangement of your office. The easiest way is to use your normal working table as digitizer surface. This solution saver a lot of time, because you don’t waste time.